APPLICATION OF A LOW-FREQUENCY AEROELASTIC ELEMENT METHOD TO THE HARMONIC GUST RESPONSE ANALYSIS OF A FLEXIBLE AIRPLANE
Keywords:
Aerodynamics, Structures, DesignAbstract
The low-frequency aeroelastic element method developed recently at Helsinki University of Technology, Finland, is briefly reviewed. In this method, the unsteady aerodynamic forces are calculated by using a low-frequency vortex panel method. The state of motion of the flexible airplane is given in terms of rigid-body modes and measured elastic modes. For comparison, some published experimental and calculated results obtained by this method for the B-47A sweptwing bomber are shown. The method is applied to the harrnonic gust responce analysis of the PIK-20D sailplane. Calculaced plunge, pitch, and wing bending responses in terms of the gust frequency are given. Elastic gust amplification factors and zero-crossing frequencies at four spanwise wing stations are shown in different flight conditions and compared with classical plunge-only values. In some cases, the elastic gust amplification factors are seen to be over 70 per cent in excess of the rigid plunge-only values, which is much more than the common design practice. Possible causes of this are briefly discussed.Downloads
Issue
Section
Articles
License
CLEARANCE AND LICENSE TO PUBLISH:
This paper is UNCLASSIFIED (for public reasons) and has been cleared by the appropriate agencies, company and government. This paper represents original work by the author(s). No portion of the material is covered by a prior copyright; or for any portion copyrighted, the author has obtained permission for its use.
I hereby license OSTIV to publish this paper and to use it for all of OSTIV's current and future publications uses.